Dodge Dart Forum banner

Needing 2.4 engine wiring diagram

966 views 4 replies 3 participants last post by  Nick_210-13  
#1 ·
I'm getting p2311 code and when I checked the ignition connector I'm getting grounds on both sides only # 4 coil connector
 
#4 ·
It's the PCM that supplies ground to the coil precisely when a spark is needed. The brown/yellow should have a positive 12 volts from the PDC when the ASD relay is activated as shown by the schematic. Check your wiring, it's not the PCM.
 
  • Like
Reactions: Nick_210-13