"Hi, I am currently attempting to install a remote start on my 2015 Dodge Dart GT with a manual transmission. However, I am facing challenges with the ignition and hood pin connection. According to the instructions, the wiring should be located under the passenger side, under the glove box. However, there are multiple wires and I am having trouble locating the c5 ignition connection and the hood pin connection. I have attached some pictures of the wiring under the glove box for reference.
JohnLee
2015 Dodge Dart GT Manual Remote Start C5 Ignition Connection
"Hi, I am currently attempting to install a remote start on my 2015 Dodge Dart GT with a manual transmission. However, I am facing challenges with the ignition and hood pin connection. According to the instructions, the wiring should be located under the passenger side, under the glove box. However, there are multiple wires and I am having trouble locating the c5 ignition connection and the hood pin connection. I have attached some pictures of the wiring under the glove box for reference.
Attachments
You are looking at the CAN Bus network STAR connectors. You should be looking at the BCM. The BCM is on the driver side firewall. Looks like the pinouts in your instructions are wrong.
I am enclosing all the pinouts for the BCM connectors.
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
![Image]()
I am enclosing all the pinouts for the BCM connectors.
Since the instruction pinout for the ignition connection is incorrect, I have come up with a solution after examining the picture you posted of the BCM. The correct module for the body control is c8, with pin 48 having a wire color of pink/white and functioning as the ignition run/start control output, is this the right wire?
With instructions that are that wrong, I would return it. The BCM is not under the glove box and doesn't even have a 48 pin or a 24 pin connector. Who knows what vehicle (Viaggio??) those instructions are for or if the wire colors are correct. If your guess turns out wrong, you could really mess up your wiring and possibly fry the two motherboards inside the BCM.
Just my opinion but I would never even want remote start especially an aftermarket one made in China where they don't have Darts.
As far as I know, no one has figured out how to get a factory remote start fob to work on a Dart that didn't have the remote start option.
Just my opinion but I would never even want remote start especially an aftermarket one made in China where they don't have Darts.
As far as I know, no one has figured out how to get a factory remote start fob to work on a Dart that didn't have the remote start option.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
