Nice!, you are ready for the SMOG then. Post up your passing test here when you are done!!
21 - 30 of 30 Posts
Recent case from the wrangler forum:
Here’s a follow up. Permanent P0128 still here but I passed smog. My Actron scanner shows monitors since last DTC, Diagnostic Trouble Code earse, but not miles or drive cycles since. I kept track of miles and cycles as I watched the monitors slowly show ready. The last monitor took about 275 miles.
www.wranglerforum.com
Here’s a follow up. Permanent P0128 still here but I passed smog. My Actron scanner shows monitors since last DTC, Diagnostic Trouble Code earse, but not miles or drive cycles since. I kept track of miles and cycles as I watched the monitors slowly show ready. The last monitor took about 275 miles.
Permanent P0128 Fault Code
My 2015 JK has been throwing P0128 codes for about a year. Usually only late at night or in the morning when it's cold. I have been just ignoring it as it goes away after a few cycles, or I erase it with Jscan. In the beginning after a few codes it logged a P0128 Permanent Fault Code that never...
www.wranglerforum.com
Following up to my followup on the saga of a permanent code and not passing smog. What a crazy ride it has been. After more than 1500 miles driven and 35 starts my OBD reader gave this to me this morning. I do believe THIS is what I need to finally get this dang thing smogged? I fear taking it to any of the shops I have previously for fear I am not yet "ready" in their eyes. Thanks for the support and feedback. Gotta do something to figure out what happened and why it took so long for the computer to reset. My tags expired in April and I have been chasing this since Feb. Yikes!!
Forgot to say that I paid to have it smoke tested and they could not find anything wrong at all. Sigh
Forgot to say that I paid to have it smoke tested and they could not find anything wrong at all. Sigh
Attachments
Huh, yea that is strange. I am not sure. Maybe one of the pins is not making good contact in the plug?
Should see a series of green lights across the top like this:
![]()
Should see a series of green lights across the top like this:
That is what I thought I should see but it is not there. The dialogue is the same but only the one green light as shown in the pic I posted previously. Will try plugging it in again in the morning. This has been such a pain in the butt!!Huh, yea that is strange. I am not sure. Maybe one of the pins is not making good contact in the plug?
Should see a series of green lights across the top like this:
![]()
21 - 30 of 30 Posts
