Dodge Dart Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
I have a 2014 Dart with a taillamp not working. I've got the taillamp assembly out but darned if I can figure out how to gain access to the bulbs. Can anyone help me here?
 

· Administrator
Joined
·
6,301 Posts
It's a sealed assembly with soldered in LEDs. You should be able to find another at a self serve you pull type junkyard for not too much. But before you go out to buy something, make sure you have voltage at the connector using a multimeter.
 
  • Like
Reactions: BMac57

· Registered
Joined
·
6 Posts
Discussion Starter · #3 ·
It's a sealed assembly with soldered in LEDs. You should be able to find another at a self serve you pull type junkyard for not too much. But before you go out to buy something, make sure you have voltage at the connector using a multimeter.
checked the connector plug from the wire harness. It showed I was getting power, so I plugged it back in and it's working again! guess it was just a lose connection. Kind'a crappy Dodge made these so you can't replace the led strip and have to replace the whole assembly though.
 
1 - 3 of 3 Posts
Top