Dodge Dart Forum banner

1 - 19 of 19 Posts

·
Registered
Joined
·
2,883 Posts
Discussion Starter #1
Want to buy stock hot side and stock cold side with hose couplers.

Let me know if you have any for sale.

Thanks.
 

·
Banned
Joined
·
1,383 Posts
I might be interested in selling mine for a fair offer and covering shipping costs. Why you going back to stock? Selling your car?
 

·
Banned
Joined
·
1,383 Posts
Are you having trouble with your Injen pipes blowing off the hot side? I read that quite a few people have issues with that because of the lack of bracket fab. You ever consider getting a set of the MPx ones instead?
 

·
Registered
Joined
·
334 Posts
I have my stock hot/cold pipes.
 

·
Banned
Joined
·
1,383 Posts

·
Registered
Joined
·
2,883 Posts
Discussion Starter #7
Sorry, I think there was a misunderstanding. I need the stock pipes and the hose couplers, that are also part of the inlet and outlet. The silicon hoses that attach to the intercooler are the most important part to me.
 

·
Banned
Joined
·
1,383 Posts
lol....those are attached to my car, can't change pipes without them. Your gonna need to buy those brand new, or find them off a wrecked Dart maybe. Good luck.
 

·
Registered
Joined
·
2,883 Posts
Discussion Starter #12
Here's the picture you requested. I also found the cushions, sensor bolt, and throttle body coupler I'll throw in. <img src="http://www.dodge-dart.org/forum/attachment.php?attachmentid=45341"/>
Thanks. I can't tell in the picture, but are the retainer clips still attached to the metal ends?
 

·
Registered
Joined
·
187 Posts
Hello! I am in need of the cold side assembly, complete, or just the lower coupler rubber tubing that connects the IC to the cold pipe with the clamps.

Mine developed a crack and I need to replace it, I dont want to spend $160 for the entire assembly just to take off the coupler I need on the bottom.

Let me know if you have one available...anyone! Thank you!
 
1 - 19 of 19 Posts
Top