Dodge Dart Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a dodge dart 2015 se basic model with no touchscreen basic radio and i am trying to add my sub and amp to the system i did alot of looking and cant seem to find the correct speakers to splice lead alone the color coding for positive and negative i pulled up the piller for my front door and found a group of wires and some are twisted together and i assume those to be speaker connections. But i dont know which ones are front or the back. I been trying to figure this out for a full week which i thought would be only a 2 day job for wire running and installation for the line output converter which wires are the front and which ones are the back.? I am like desperate at this point best buy wants a 100 bux for this simplistic job i just dont know the colors or which ones are for the speakers. Please help.

Sent from my LGLS676 using Tapatalk
 

·
Registered
Joined
·
2,433 Posts
audiobaseschematic.jpg

radioC1A.jpg

radioC1B.jpg

radioC1C.jpg


audiopremiumschematic.jpg

radioC2a.jpg

radioC2B.jpg

audiopremium2schematic.jpg

radioC2a.jpg

radioC2b.jpg

If anyone wants the full file size schematic for any of these, please pm your email address.
 

·
Registered
Joined
·
21 Posts
Fairly simple question:

I have a '15 Dart Limited, NO 506w Alpine system. It does have the RB5 radio (touchscreen/nav), two speakers in the dash and one speaker in each of the four doors for a total of six.

I'm trying to upgrade to the Alpine system by buying the upgraded door speakers, subwoofer and rear package shelf speakers. (2x 5064359AB for the rear shelf, 4x 5064358AB for the doors and 1x 5064983AB subwoofer. The front dash speakers are the same according to the parts list (?)) I also am assuming I don't have the amp, so I need 1x 5091066AI amp to go behind the glove box; but I'll confirm for sure I don't have the amp already...

Key question: Is the wiring harness already in place to add the amp and extra speakers? If not, what is the wiring harness part number? I cannot find anything in the Mopar parts that says anything about speaker harness for the rear speakers...��
 

·
Registered
Joined
·
2,433 Posts
You would need to find wrecked Dart with that system in a self serve junkyard.
 

·
Registered
Joined
·
1 Posts
I have a dodge dart 2015 se basic model with no touchscreen basic radio and i am trying to add my sub and amp to the system i did alot of looking and cant seem to find the correct speakers to splice lead alone the color coding for positive and negative i pulled up the piller for my front door and found a group of wires and some are twisted together and i assume those to be speaker connections. But i dont know which ones are front or the back. I been trying to figure this out for a full week which i thought would be only a 2 day job for wire running and installation for the line output converter which wires are the front and which ones are the back.? I am like desperate at this point best buy wants a 100 bux for this simplistic job i just dont know the colors or which ones are for the speakers. Please help.

Sent from my LGLS676 using Tapatalk
Check out Crutchfield.com they have everything you need. Even an online chat line
 
1 - 5 of 5 Posts
Top