[Kittkat]

My car had been shaking since I have gotten it nothing I do fixes the problem. Have changed evap sensor and charcoal canister and thermostat and checked all of the coils and have changed spark plugs, currently clueless on how to fix the shake. Did clean my throttlebody and helped alittle but went back to the same shaking.

 

[alpinegreenneon]

Search the forum for posts about engine mounts. The rubber has worn out and the engine is sitting metal on metal. If you don't have misfire codes, it's NOT misfiring.

 

[Kittkat]

My engine mounts are a little worn but not metal to metal

 

[Kittkat]

Search the forum for posts about engine mounts. The rubber has worn out and the engine is sitting metal on metal. If you don't have misfire codes, it's NOT misfiring.

My engine mounts are a little worn but not metal to metal

 

[Oldarter#63]

Scan it for codes. If none come up then, like AGN said, it's the motor mounts.

 

[Gohawks12]

My engine mounts are a little worn but not metal to metal

Did you pull them out? Only way you can tell if it's not metal on metal.

 

[Bigwiggs3214]

These cars also have a natural shake to them. Almost like a diesel sound or like valve tap but it's the multi air system and the fact that 4 cylinders aren't the most balanced.

 

[GGCooper63]

Search the forum for posts about engine mounts. The rubber has worn out and the engine is sitting metal on metal. If you don't have misfire codes, it's NOT misfiring.

I had the same problem. motor mounts..

 

[Oldarter#63]

These cars also have a natural shake to them. Almost like a diesel sound or like valve tap but it's the multi air system and the fact that 4 cylinders aren't the most balanced.

^^ First time I've heard that.

 

[Bobcubs08]

These cars also have a natural shake to them. Almost like a diesel sound or like valve tap but it's the multi air system and the fact that 4 cylinders aren't the most balanced.

Absolutely not true.