Dodge Dart Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Ok so I have this 2014 Dart, I've tried every conceivable combination of wires to enable remote start, there is no wiring for it under the hood so just working off the bcm.
C6 connector pin 32 is hood ajar ground
C4 connector pin 8 is hood ajar sensor
I've tried connecting both 2 ground,
Both to ground with 1k resistor
C6 to ground, c4 to ground with resistor
C4 to ground, c6 to ground with resistor
C4 to c6
C4 to ground
C4 to ground with resistor
C6 to ground
C6 to ground with resistor
I'm officially stumped!!

Sent from my SM-G981W using Tapatalk
 

·
Super Moderator
Joined
·
5,156 Posts
Does your RFHM have the antenna for the remote start? There are different RFHM part numbers depending on options like remote start.
127355
 

·
Super Moderator
Joined
·
5,156 Posts
It's under the package shelf trim above the rear seatback. Check the part number to see if it has a socket for the remote start antenna.
 
1 - 5 of 5 Posts
Top