Dodge Dart Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2,614 Posts
You are going to need the correct Torx sockets.

TORX-sockets.jpg
Torxsockets2.jpg

17 - Rear Suspension / SHOCK ABSORBER, Suspension / Removal

REMOVAL

1.Raise and support the vehicle (Refer to 04 - Vehicle Quick Reference/Hoisting - Standard Procedure) .

2.Remove the wheel mounting bolts, then the rear tire and wheel assembly.

3.Support the rear suspension with a jack stand or equivalent.

4.Remove the bolt (2) securing the lower end of the shock assembly (1) to the lower transversal link.

dartrearshock1.jpg

5.Remove the upper shock mounting bolts (1) and remove the shock from the vehicle.

dartrearshock2.jpg
 
1 - 4 of 4 Posts
Top