Dodge Dart Forum banner
1 - 3 of 3 Posts

·
Administrator
Joined
·
5,843 Posts
Quick connects are part of the hose and not a separate part that you can buy. You might want to try a self serve junkyard first before running to the dealer.
 

·
Administrator
Joined
·
5,843 Posts
Can you post a pic of the Quick Connect on the new hose?
There are quite a few different types and your previous pic doesn't help
 

·
Administrator
Joined
·
5,843 Posts
Two Tab Type Fitting

This type of quick-connect fitting (2) is equipped with tabs located on both sides of the fitting (1). These tabs are integral to the hose component. The plastic tabs will remain on the component being serviced after the quick-connect fitting is removed. The O-ring and spacer will remain in the quick-connect fitting. The plastic tab portion should be removed from the component. Special tools are not required for removal.
Hand Arm Gesture Elbow Thumb

1.Squeeze the plastic tabs (1) against the sides of component being serviced with your fingers.

2.Remove the quick-connect fitting from the component.
 
1 - 3 of 3 Posts
Top