Dodge Dart Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Does anyone know what size the bolts are that hold the flange together near the engine that’s connected to the converter?
 

·
Super Moderator
Joined
·
3,650 Posts
1.4L, 2.0L, or 2.4L?
 

·
Super Moderator
Joined
·
3,650 Posts
Those bolts are M8x1.25 but are not serviced as they are a part of the manivertor (manifold/catalytic convertor). They are splined and can be pressed out. Replace with a standard M8 bolt.
 

·
Super Moderator
Joined
·
3,650 Posts
There is a part number for other Mopar vehicles for the same location on the convertor flange:
6503767
Here is a pic on a mopar parts site:
126470


Pounding out the bolt with a hammer may damage the convertor. From the pic, you can see the splines. There are tools to press out broken lug studs or you can drill it out.
 

·
Registered
Joined
·
4 Posts
Discussion Starter #7
Okay cause I’m installing an exhaust and that’s the only thing stopping me is I can’t get the pipe off.
 
1 - 7 of 7 Posts
Top