Dodge Dart Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
I'm getting new rims. They are 18x8.5 with 35mm offset. I've read that I might need a spacer to clear the brake calipers. I'm planning on running 235/40R18 tires. I don't want to over do the spacer. Any suggestions on if I need any or what size needed so I don't rub. Thanks
 

·
Registered
Joined
·
879 Posts
It's been a while, but off the top of my head I think offset on the Dart is 42-46mm depending on the wheel size. Based on that, a 10mm spacer should work just fine. You definitely don't want to use more than needed because of the extra stress it will put on the axle.
 

·
Registered
Joined
·
14 Posts
Discussion Starter #3
I'm running factory 18s now. I've heard the offset is 46, but when you look at aftermarket rims most are only 40. I was hoping that when I seen that, that it was wrong lol. Thank you for your input and help
 

·
Registered
Joined
·
3,018 Posts
1 - 5 of 5 Posts
Top