[onedumslack]

Activate the sensor in the BCM? Like add a fuse in the location that it would normally sit or do you mean something else. BCM is the body control module I think.

Using an obd scanner like obdlink mx+ with alfaOBD software to connect to it. You would then open the bcm module in alfaobd and reconfigure the car to tell it the sensor is installed and you have that feature. Then the proxy align after.

 

[Carvin]

Using an obd scanner like obdlink mx+ with alfaOBD software to connect to it. You would then open the bcm module in alfaobd and reconfigure the car to tell it the sensor is installed and you have that feature. Then the proxy align after.

Can you send me a proxy alignment code？

 

[onedumslack]

Can you send me a proxy alignment code？

I don't know what that means. I just open the app and select the option to enable the sunlight sensor and then run a proxy alignment. I don't enter in any codes.

 

[onedumslack]

Can you send me a proxy alignment code？

Can you post a screenshot of what's asking for a code?

 

[Carvin]

你能发布要求代码的屏幕截图吗？
[/报价]

 

[Carvin]

Can you post a screenshot of what's asking for a code?

I am willing to pay $50 for help

 

[onedumslack]

I am willing to pay $50 for help

I've never seen anything like that. I've not tried doing a custom proxi before. I've only gone into the bcm menu and enabled or disabled setting from menus and then run a proxi align. Are you trying to enable automatic headlights or is this for something else?

 

[Carvin]

I've never seen anything like that. I've not tried doing a custom proxi before. I've only gone into the bcm menu and enabled or disabled setting from menus and then run a proxi align. Are you trying to enable automatic headlights or is this for something else?

My car is a Fiat Viaggio, the Fiat equivalent of the Dart. I tried it, but it didn't work, so I wanted to customize it.I have already replaced the headlamp switch.

 

[alpinegreenneon]

Pretty sure @Carvin is using Multiecuscan to see that custom PROXI.

Multiecuscan - Diagnostics software for Italian cars

 

[Carvin]

相当确定@Carvin正在使用Multiecuscan查看自定义PROXI。

Multiecuscan - Diagnostics software for Italian cars

[/报价]
是的，我尝试了许多方法，也尝试了许多OBD接口。最后，我找到了multiecuscan，我发现配置可以自定义。

Press and hold ctrl+alt+c in this interface
You can view the vehicle configuration

 

[onedumslack]

It says your dusk sensor is not present. Are you able to change that setting to enabled or present? Or is that only showing you current status?

 

[Carvin]

It says your dusk sensor is not present. Are you able to change that setting to enabled or present? Or is that only showing you current status?

I didn't find the option to change the vehicle configuration on the viaggio page.

 

[Carvin]

它说你的黄昏传感器不存在。能否将设置更改为启用或显示？还是只显示你的当前状态？
[/报价]

它说你的黄昏传感器不存在。能否将设置更改为启用或显示？还是只显示你的当前状态？
[/报价]

 

[onedumslack]

You don't have a "car configuration change" menu in alfaobd?

 

[Carvin]

You don't have a "car configuration change" menu in alfaobd?
View attachment 129245

Yes

You don't have a "car configuration change" menu in alfaobd?
View attachment 129245

Yes

 

[Carvin]

You don't have a "car configuration change" menu in alfaobd?
View attachment 129245

I want to import custom configuration. Importing dart code may solve all the problems I encounter.

 

[onedumslack]

I want to import custom configuration. Importing dart code may solve all the problems I encounter.

Would I have to use that software you were using previously to obtain this code? I don't have the car currently cause it's my kids so I'd have to wait for later when they return to do anything. But programming by codes like that sounds like it could cause other issues since we likely do not have the same car configuration overall. I've also made other changes to my car configuration.

 

[Carvin]

Would I have to use that software you were using previously to obtain this code? I don't have the car currently cause it's my kids so I'd have to wait for later when they return to do anything. But programming by codes like that sounds like it could cause other issues since we likely do not have the same car configuration overall. I've also made other changes to my car configuration.

Yes, I have found many programs. I am sure that I can only customize them with multiecuscan. You can download the trial version to help me check the dart code.

 

[Carvin]

Would I have to use that software you were using previously to obtain this code? I don't have the car currently cause it's my kids so I'd have to wait for later when they return to do anything. But programming by codes like that sounds like it could cause other issues since we likely do not have the same car configuration overall. I've also made other changes to my car configuration.

This is the code of viaggio I saw:
36 35 33 34 33 30 34 30 33 36 36 4F 55 54 50 54 44 4A 49 54 20 14 07 11 6F 0C 60 05 00 24 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6F 00 00 00 00 00 00 00 00 20 00 02 00 00 00 00 00 00 00 00 54 D4 40 00 80 80 07 88 1031 01 07 03 00 10 00 10 00 A9 1E 10 02 00 05 43 28 0043 03 08 01 03 04 00 00 66 00 02 00 00 00 00 00 00 00 00 00 00 00 0000 00 33 00 10 20 80 00 50 00 00 02 00 00 04 79 00 04 00 00 C4 00 00 00 00 00 00 00 00 E910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

 

[onedumslack]

This is the code of viaggio I saw:
36 35 33 34 33 30 34 30 33 36 36 4F 55 54 50 54 44 4A 49 54 20 14 07 11 6F 0C 60 05 00 24 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6F 00 00 00 00 00 00 00 00 20 00 02 00 00 00 00 00 00 00 00 54 D4 40 00 80 80 07 88 1031 01 07 03 00 10 00 10 00 A9 1E 10 02 00 05 43 28 0043 03 08 01 03 04 00 00 66 00 02 00 00 00 00 00 00 00 00 00 00 00 0000 00 33 00 10 20 80 00 50 00 00 02 00 00 04 79 00 04 00 00 C4 00 00 00 00 00 00 00 00 E910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

I receive an error when I try to connect. Not sure if my laptop I'm using is not compatible with the software or something else.