Dodge Dart Forum banner
1 - 20 of 20 Posts

·
Registered
Joined
·
26 Posts
Can you give me a hand?
 

·
Registered
Joined
·
26 Posts
I've never seen anything like that. I've not tried doing a custom proxi before. I've only gone into the bcm menu and enabled or disabled setting from menus and then run a proxi align. Are you trying to enable automatic headlights or is this for something else?
My car is a Fiat Viaggio, the Fiat equivalent of the Dart. I tried it, but it didn't work, so I wanted to customize it.I have already replaced the headlamp switch.
Motor vehicle Steering part Automotive design Grey Personal luxury car

Speedometer Car Vehicle White Tachometer

Car Gear shift Vehicle Automotive design Steering part
 

·
Registered
Joined
·
26 Posts
alpinegreenneon,帖子:793148,成员:1992 said:
相当确定@Carvin正在使用Multiecuscan查看自定义PROXI。
[/报价]
是的,我尝试了许多方法,也尝试了许多OBD接口。最后,我找到了multiecuscan,我发现配置可以自定义。
Rectangle Font Screenshot Parallel Pattern

Rectangle Font Screenshot Parallel Pattern
Rectangle Font Parallel Screenshot Pattern


Press and hold ctrl+alt+c in this interface
You can view the vehicle configuration
 

·
Registered
Joined
·
26 Posts
Would I have to use that software you were using previously to obtain this code? I don't have the car currently cause it's my kids so I'd have to wait for later when they return to do anything. But programming by codes like that sounds like it could cause other issues since we likely do not have the same car configuration overall. I've also made other changes to my car configuration.
Yes, I have found many programs. I am sure that I can only customize them with multiecuscan. You can download the trial version to help me check the dart code.
 

·
Registered
Joined
·
26 Posts
Would I have to use that software you were using previously to obtain this code? I don't have the car currently cause it's my kids so I'd have to wait for later when they return to do anything. But programming by codes like that sounds like it could cause other issues since we likely do not have the same car configuration overall. I've also made other changes to my car configuration.
This is the code of viaggio I saw:
36 35 33 34 33 30 34 30 33 36 36 4F 55 54 50 54 44 4A 49 54 20 14 07 11 6F 0C 60 05 00 24 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 6F 00 00 00 00 00 00 00 00 20 00 02 00 00 00 00 00 00 00 00 54 D4 40 00 80 80 07 88 1031 01 07 03 00 10 00 10 00 A9 1E 10 02 00 05 43 28 0043 03 08 01 03 04 00 00 66 00 02 00 00 00 00 00 00 00 00 00 00 00 0000 00 33 00 10 20 80 00 50 00 00 02 00 00 04 79 00 04 00 00 C4 00 00 00 00 00 00 00 00 E910 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 

·
Registered
Joined
·
26 Posts
I receive an error when I try to connect. Not sure if my laptop I'm using is not compatible with the software or something else.
View attachment 129246
The Bluetooth OBD baud rate is set to 38400 in the computer
1. Go to Adjustments
2. press ctrl+alt+c from the keyboard
3. Multiecuscan will open a window with title “Custom PROXI”. Be very careful here not to delete or change something!
4. You should see a box with many bytes of data (this is the complete PROXI configuration)
 

·
Registered
Joined
·
26 Posts
Yours might be different cause yours seems to have the climate control ac and I'm guessing the lcd screen for radio and other controls. Mine was basic and did not have lcd and all manual ac. For mine it plugged directly into the back of the ac control module with the dials on the front. The wire colors were the same on both sides and was a 4 wire connection. Your might have just a module that it connects to that's inside the dash.
I think the problem lies with the BCM. I don't know if importing dart data into my car will work, but I have to try.
 
1 - 20 of 20 Posts
Top