Dodge Dart Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
My friend wanted to know if I wanted his wheels the other day. They are 7x17 with 5x120 bolt pattern. My dart is 16x7 with a 5x110 bolt pattern. I wanted to know if a spacer adapter would work. I don’t want to spend a lot of money on new wheels and was hoping I could get these from him. Just not sure if it would work.
 

·
Registered
2016 GT 2.4L AT
Joined
·
104 Posts
In Canada anyway to buy a GOOD set of hub adapters would cost you about $600 so while the wheels are free in reality they are not. Plus the fact that there is some caution to be used because of the width of the wheel spacers themselves and the offset of the free wheels. Lots to consider!!!
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
In Canada anyway to buy a GOOD set of hub adapters would cost you about $600 so while the wheels are free in reality they are not. Plus the fact that there is some caution to be used because of the width of the wheel spacers themselves and the offset of the free wheels. Lots to consider!!!
Okay thank you so much for clearing that up for me
 
1 - 3 of 3 Posts
Top