LED headlights have low beam out chime
Follow Us On Follow us on Google Plus Follow us on Facebook
    Register

    LED headlights have low beam out chime

    This is a discussion on LED headlights have low beam out chime within the Dodge Dart Lighting forums, part of the Dodge Dart Garage - The Mopar Zone category; I installed a set of led headlights yesterday and when turning on the car I get a chime about low beam lights out but once ...

    User Tag List

    Results 1 to 8 of 8
    1. #1
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      May 2019
      Posts
      3
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)

      LED headlights have low beam out chime

      I installed a set of led headlights yesterday and when turning on the car I get a chime about low beam lights out but once I turn on the headlights, this chime continues every 10-15 seconds. So I’m curious as to what I did wrong? The part number was 9012 which is the standard bulb size for the car.

    2. #2
      Tire Carrier
      Rank
       
      Rep
       
      Archangel3297's Avatar
      is keeping it going
       

      Join Date
      Feb 2019
      Location
      Knoxville, Tennessee
      Posts
      102
      Vehicle
      2013 Dodge Dart Rallye (Midnight) 2.0L tigershark
      Mods
      blacked emblems | nightshade tail lights | nakamoto brakes | powder coated rims
      Liked
      8 times
      Gender
      Male
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      more than likely you just need to add the led resistor. since the dart has a bcm if you change anything and the car senses a difference it will let you know. the issue is that leds take alot less power to run so you have to add the resistor in order to get the warning to go away
      2013 Dodge Dart Rallye 2.0L

      • New (used) Bluetooth Module
      • CLD LED Conversion Kit w/Resistors
      • Nightshade Tail-lights
      • Nakamoto Performance Brakes
      • Spectre Cold Air Intake
      • Powder Coated Wheels (coming soon)
      • Custom "RALLYE" Off Centered vinyl
      • Cross Hair Grill Delete/ Mesh Grill Insert (coming soon)

    3. #3
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      May 2019
      Posts
      3
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      How would I do that? I can’t find any guides on it but I do have another theory. Apparently there are LEDs that have a canbus adapter build into them to prevent the error codes and I believe this is what will fix the issue

    4. Remove Advertisements
      Dodge-Dart.org
      Advertisements
       

    5. #4
      Tire Carrier
      Rank
       
      Rep
       
      Archangel3297's Avatar
      is keeping it going
       

      Join Date
      Feb 2019
      Location
      Knoxville, Tennessee
      Posts
      102
      Vehicle
      2013 Dodge Dart Rallye (Midnight) 2.0L tigershark
      Mods
      blacked emblems | nightshade tail lights | nakamoto brakes | powder coated rims
      Liked
      8 times
      Gender
      Male
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      basically the canbus adapter is the resistor. and they have some videos on doing an led conversion kit on youtube. ill try to find a video for you. you can find the canbus set up as a plug and play where on end goes into the bulb line and the other will go to the main harness
      2013 Dodge Dart Rallye 2.0L

      • New (used) Bluetooth Module
      • CLD LED Conversion Kit w/Resistors
      • Nightshade Tail-lights
      • Nakamoto Performance Brakes
      • Spectre Cold Air Intake
      • Powder Coated Wheels (coming soon)
      • Custom "RALLYE" Off Centered vinyl
      • Cross Hair Grill Delete/ Mesh Grill Insert (coming soon)

    6. #5
      Tire Carrier
      Rank
       
      Rep
       
      Archangel3297's Avatar
      is keeping it going
       

      Join Date
      Feb 2019
      Location
      Knoxville, Tennessee
      Posts
      102
      Vehicle
      2013 Dodge Dart Rallye (Midnight) 2.0L tigershark
      Mods
      blacked emblems | nightshade tail lights | nakamoto brakes | powder coated rims
      Liked
      8 times
      Gender
      Male
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      im just going to post this here for the others keeping up with this thread. for the dart that came with the standard bulbs, here is the led conversion kit designed for it. these are some of the brightest bulbs you can find, and they have a lifetime warranty.

      https://www.carlightingdistrict.com/...rsion-kit-9012
      2013 Dodge Dart Rallye 2.0L

      • New (used) Bluetooth Module
      • CLD LED Conversion Kit w/Resistors
      • Nightshade Tail-lights
      • Nakamoto Performance Brakes
      • Spectre Cold Air Intake
      • Powder Coated Wheels (coming soon)
      • Custom "RALLYE" Off Centered vinyl
      • Cross Hair Grill Delete/ Mesh Grill Insert (coming soon)

    7. #6
      Tire Carrier
      Rank
       
      Rep
       
      Archangel3297's Avatar
      is keeping it going
       

      Join Date
      Feb 2019
      Location
      Knoxville, Tennessee
      Posts
      102
      Vehicle
      2013 Dodge Dart Rallye (Midnight) 2.0L tigershark
      Mods
      blacked emblems | nightshade tail lights | nakamoto brakes | powder coated rims
      Liked
      8 times
      Gender
      Male
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      ok everyone so i have done the research and (once i get my sponsorship finished up) i will be purchasing the led conversion kit i mentioned above. i have been talking with a rep and there is a resistor set that is needed for the kit so it doesnt throw any code. her is the link:
      https://www.carlightingdistrict.com/...=2193850105865

      i hope this helps others that are interested. and sns found a cheaper way of going into leds as well. please let me know if you have any questions
      2013 Dodge Dart Rallye 2.0L

      • New (used) Bluetooth Module
      • CLD LED Conversion Kit w/Resistors
      • Nightshade Tail-lights
      • Nakamoto Performance Brakes
      • Spectre Cold Air Intake
      • Powder Coated Wheels (coming soon)
      • Custom "RALLYE" Off Centered vinyl
      • Cross Hair Grill Delete/ Mesh Grill Insert (coming soon)

    8. #7
      Master Mechanic
      Rank
       
      Rep
       
      alpinegreenneon's Avatar
      This user has no status.
       

      Join Date
      Feb 2013
      Location
      NW Wisconsin
      Posts
      2,033
      Liked
      762 times
      Gender
      Male
      Mentioned
      133 Post(s)
      Tagged
      0 Thread(s)
      Have you read what folks on the Ram and Jeep forums are doing with alfaOBD? Not sure if Darts are the same but on Rams there are settings to change and then the BCM accepts the leds. No need for resistors or special harnesses. Lots to read and try.
      https://www.ramforum.com/threads/alfaobd.123982/
      -Case

      16 Dart SXT 2.0 TorRed stock
      16 Dart SE 2.0 Laser Blue Pearl stock
      98 Sport Coupe DOHC Alpine Green ATX stock
      95 NYG ACR Coupe (restored)
      18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock


    9. #8
      Tire Carrier
      Rank
       
      Rep
       
      Archangel3297's Avatar
      is keeping it going
       

      Join Date
      Feb 2019
      Location
      Knoxville, Tennessee
      Posts
      102
      Vehicle
      2013 Dodge Dart Rallye (Midnight) 2.0L tigershark
      Mods
      blacked emblems | nightshade tail lights | nakamoto brakes | powder coated rims
      Liked
      8 times
      Gender
      Male
      Mentioned
      0 Post(s)
      Tagged
      0 Thread(s)
      Hmm. I have the next 2 days off. I'll have to see what's up
      2013 Dodge Dart Rallye 2.0L

      • New (used) Bluetooth Module
      • CLD LED Conversion Kit w/Resistors
      • Nightshade Tail-lights
      • Nakamoto Performance Brakes
      • Spectre Cold Air Intake
      • Powder Coated Wheels (coming soon)
      • Custom "RALLYE" Off Centered vinyl
      • Cross Hair Grill Delete/ Mesh Grill Insert (coming soon)

     

     

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •  

    Similar Threads

    1. Lasfit 9012 Led high/low beam bulb
      By BilB0Y108 in forum Dodge Dart Lighting
      Replies: 5
      Last Post: 12-19-2017, 10:36 AM
    2. Replies: 128
      Last Post: 12-06-2017, 02:24 PM
    3. low beam headlights
      By smis in forum Dodge Dart General Discussion
      Replies: 2
      Last Post: 08-10-2016, 06:06 AM
    4. Anyone else have a (low end engine knock) at low speed and low RPM
      By ejf0255 in forum Dodge Dart General Discussion
      Replies: 5
      Last Post: 09-09-2014, 10:55 AM
    5. low beam bulb out
      By Shakoo in forum Dodge Dart Lighting
      Replies: 27
      Last Post: 06-21-2014, 10:33 AM