Proxy alignment
Follow Us On Follow us on Google Plus Follow us on Facebook
    Register

    Proxy alignment

    This is a discussion on Proxy alignment within the Dodge Dart General Discussion forums, part of the Dodge Dart Forum - Dodge Dart Discussion category; I have a 2013 Dart 1.4l turbo. the problem Im having is that my microphone doesnt seem to work on my Uconnect. all the wiring ...

    User Tag List

    Page 1 of 2 1 2 LastLast
    Results 1 to 10 of 11

    Thread: Proxy alignment

    1. #1
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Feb 2019
      Posts
      28
      Liked
      3 times
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)

      Proxy alignment

      I have a 2013 Dart 1.4l turbo. the problem Im having is that my microphone doesnt seem to work on my Uconnect. all the wiring seems ok. it seems to possibly be the telematics module. i have bought another one from ebay. if i just go and swap it out. Will i need to do a Proxy alignment.? I do have the Obd2Mx and i can purchase the alfaObd software but i have no idea what the procedure is. If someone had a walk through it would be fantastic..

    2. #2
      Master Mechanic
      Rank
       
      Rep
       
      alpinegreenneon's Avatar
      This user has no status.
       

      Join Date
      Feb 2013
      Location
      NW Wisconsin
      Posts
      2,086
      Liked
      770 times
      Gender
      Male
      Mentioned
      135 Post(s)
      Tagged
      0 Thread(s)
      Since the electronics are networked together, it is possible that a PROXI may need to be done. With alfaOBD it's easy.
      Start alfaOBD. Select Dodge/Ram, select Dodge Dart (PF), next pulldown select BODY COMPUTER. Under Select Control Unit, select Body Computer Delphi/Marelli. Once you have the bluetooth connection, touch the Fiat open hood icon. Under the Select procedure to start pulldown, go almost all the way to the end of the list and select PROXY alignment. Select START and the program does the alignment, you don't need to do anything else.
      -Case

      16 Dart SXT 2.0 TorRed stock
      16 Dart SE 2.0 Laser Blue Pearl stock
      98 Sport Coupe DOHC Alpine Green ATX stock
      95 NYG ACR Coupe (restored)
      18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock


    3. #3
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Jun 2014
      Location
      Farmington, MI
      Posts
      8
      Vehicle
      2013 Dart GT Blue Streak
      Mods
      None at the moment.
      Liked
      2 times
      Gender
      Male
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)
      likely not a telematics issue, more like a HFM issue and it is external from the telematics module.

    4. Remove Advertisements
      Dodge-Dart.org
      Advertisements
       

    5. #4
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Feb 2019
      Posts
      28
      Liked
      3 times
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)
      thank you. i will post what i figure out.

    6. #5
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Feb 2019
      Posts
      28
      Liked
      3 times
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)
      ok. so i tried to plug in the tcm and the wiring harness fits but the other wire set that looks like a charging connector wont go in. s/n was a match and the it came up as a match for a compatible car. i can get it to go in if i trim off the side but im hesitant to do that . anyone know what those wires do?

    7. #6
      Master Mechanic
      Rank
       
      Rep
       
      alpinegreenneon's Avatar
      This user has no status.
       

      Join Date
      Feb 2013
      Location
      NW Wisconsin
      Posts
      2,086
      Liked
      770 times
      Gender
      Male
      Mentioned
      135 Post(s)
      Tagged
      0 Thread(s)
      One of the connector ports of the CTM is not used. You are possibly trying to plug into that one.
      Please don't confuse TCM (transmission Control Module) with CTM (Convergence Telematics Module)

      08 - Electrical / 8E - Electronic Control Modules / MODULE, Convergence Telematics / Description

      DESCRIPTION

      Name:  dartctm1.jpg
Views: 18
Size:  45.8 KB


      The Convergence Telematics Module (CTM) (3) is found in vehicles equipped with the optional Uconnect® Hands-Free System. This module is located beneath the instrument panel inboard of the steering column where it is concealed behind the instrument panel steering column opening cover. The CTM hardware and circuitry is contained and protected within a molded black plastic housing that has two integral mounts (2) and an integral locating pin (1). The CTM is positioned to a stamped metal mounting bracket by the locating pin, then secured to the bracket by two screws. Two additional screws secure the mounting bracket to the instrument panel support structure.

      The CTM has three integral connector receptacles that are oriented toward the dash panel when it is installed in the vehicle. The upper receptacle (6) connects the CTM to the vehicle electrical system through a dedicated take out and connector of the instrument panel wire harness. The lower receptacle (4) accepts a Universal Serial Bus (USB) cable connector that connects the CTM to the Radio Receiver Module (RRM). The center connector receptacle (5) is not used in this application.

      The internal circuitry of the CTM includes a microcontroller, flash memory and a Bluetooth™ module. The module also includes sophisticated Voice Recognition (VR) software. The CTM software is flash programmable.

      The CTM cannot be adjusted or repaired and, if damaged or ineffective, the entire CTM must be replaced. The mounting bracket for the CTM is individually serviceable.
      Last edited by alpinegreenneon; 07-14-2019 at 12:42 PM.
      -Case

      16 Dart SXT 2.0 TorRed stock
      16 Dart SE 2.0 Laser Blue Pearl stock
      98 Sport Coupe DOHC Alpine Green ATX stock
      95 NYG ACR Coupe (restored)
      18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock


    8. #7
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Feb 2019
      Posts
      28
      Liked
      3 times
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)
      ok. i was talking Ctm sorry. Ebay calls it a telematics communication module. It is #4 that i am referring to. USB to radio receiver. the plug will not fit in the hole because the 45 degree angle is on the other side. i could cut out the angle with an exacto and im pretty sure it would go in. The USB part is the same. question is Why is this one different?

    9. #8
      Master Mechanic
      Rank
       
      Rep
       
      alpinegreenneon's Avatar
      This user has no status.
       

      Join Date
      Feb 2013
      Location
      NW Wisconsin
      Posts
      2,086
      Liked
      770 times
      Gender
      Male
      Mentioned
      135 Post(s)
      Tagged
      0 Thread(s)
      What color is the connector at the end of the cable, gray or black? It should be gray. The gray and black will have the angle on opposite sides. Did your original CTM have the same port orientation?

      Name:  dartusbconnectors.jpg
Views: 19
Size:  72.1 KB
      -Case

      16 Dart SXT 2.0 TorRed stock
      16 Dart SE 2.0 Laser Blue Pearl stock
      98 Sport Coupe DOHC Alpine Green ATX stock
      95 NYG ACR Coupe (restored)
      18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock


    10. #9
      Newb
      Rep
       
      This user has no status.
       

      Join Date
      Feb 2019
      Posts
      28
      Liked
      3 times
      Mentioned
      1 Post(s)
      Tagged
      0 Thread(s)
      the connector is black

    11. #10
      Master Mechanic
      Rank
       
      Rep
       
      alpinegreenneon's Avatar
      This user has no status.
       

      Join Date
      Feb 2013
      Location
      NW Wisconsin
      Posts
      2,086
      Liked
      770 times
      Gender
      Male
      Mentioned
      135 Post(s)
      Tagged
      0 Thread(s)
      Usually, the port is the same color as the connector. Was the port in the original CTM also black? Since you say the new CTM has the angle on the wrong side, I assume the port is gray. If you are sure this is the correct cable and connector modify the connector not the port.
      -Case

      16 Dart SXT 2.0 TorRed stock
      16 Dart SE 2.0 Laser Blue Pearl stock
      98 Sport Coupe DOHC Alpine Green ATX stock
      95 NYG ACR Coupe (restored)
      18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock


     

     
    Page 1 of 2 1 2 LastLast

    Sponsored Links

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •