This is a discussion on Keyfob programer within the Dodge Dart General Discussion forums, part of the Dodge Dart Forum - Dodge Dart Discussion category; What type of keyfob programmer do I need to program new keys to a 2013 dodge dart rally with a 2.0 engine. and if possible ...
What type of keyfob programmer do I need to program new keys to a 2013 dodge dart rally with a 2.0 engine. and if possible the price.
You need the alfaOBD android app and a OBDLinkMX bluetooth adapter. You will also need the 4 digit PIN from a dealer or PIN puller app.
Start alfaOBD. Select Dodge/Ram, select Dodge Dart (PF), select Radio Frequency Hub (RFH), select control unit radio frequency hub. Select the Fiat open hood icon. Under the select procedures to start pull down menu, select Program Ignition Fobiks Baseline System. Enter your four digit number. You then remove your original key from the ignition node and insert the new key into the node but leave the ignition position to OFF or Lock and press Start. After a few seconds, it will say Completed.
16 Dart SXT 2.0 TorRed stock
16 Dart SE 2.0 Laser Blue Pearl stock
98 Sport Coupe DOHC Alpine Green ATX stock
95 NYG ACR Coupe (restored)
18 Ram 1500 3.6 4x4 Std Cab Delmonico Red stock
By Archangel3297 in forum Dodge Dart Electronics
Last Post: 05-16-2019, 07:00 AM
By Killraven in forum Dodge Dart Electronics
Last Post: 03-11-2018, 05:26 PM
By elementaldragon in forum Dodge Dart Appearance
Last Post: 01-05-2014, 11:57 AM
By HEMI'sKillingMe in forum Dodge Dart Electronics
Last Post: 10-03-2013, 09:44 PM
By mmoss57003 in forum Dodge Dart General Discussion
Last Post: 04-12-2013, 08:28 AM